CAST IRON material
Pump up water the impeller BC material
Requirements 2" -8"

Characteristic:

1. The motor and pump body make an organic whole up coaxially, can cool with water altogether, the horse rises for a long time and gives play to efficiency.
2. There is few coaxial pump the Pu 's one, reducible parts rub, promote pump function Pu lower and operate the cost
3. The motor and pump body adopt and link a type airtightly, the axis is not exposed, the sea and water department will be permeated the bearing and foreign matter by the axis and will not also be involved in ,Can prevent from axis is it turn round comparatively safe and lowering fault rate to corrode.
4. Enter water access cap and adopt the activity making up type, while drawing water and operating, if making up machine warship wears and tears, Can be entered water mouth place to dismantle, changed the outfit individually, can lower the parts cost.
5. pump adopt VFA and VTSIC material, mechanical axle seal, replace and paint the cushion material, the axis adopts SUS316L Material, able to bear corroding, not decreasing the axis, water-tight.
6. CT-C competent pump small to account for space, it is convenient to install, to operate is quiet,it exempt by Mikado from,maintenance facility.

Use: Aquaculture, irrigates, farming and animal husbandry, project food

SUS316 material
Bore 2 " -8"

Gao YangCheng, large water yield

Characteristic:
Model CT-C pump, pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is a SUS316 material, the mechanical axle seals FA and VTSIC material, corrosion-resistant, the stability is high, can give play to extremely high function and life-span

Use: Sea-farming, shipping

Gao YangCheng, large water yield

Characteristic:

1. Motor intermediate layer all adopt PBC, BC and SUS316 material to be cast, decrease wear-resisting, is able to bear the sea water to corrode
   .
2. Cool the oil inside the motor, adding the water circulation of intermediate layer, under double cooling, the bearing is longe-lived, the motor is not accumulated at all hotly, can improve the motor, function and life-span.
3. pump have VFA, VTSIC material mechanical axle seal with motor, the axis is a SUS316L material, sea water -resistant, do not decrease the axis and water-tight, pump body, raising the water wheels and water access cap, quarry SUS316 and cast materials.
4. Model CT-S pump than general pump, can promote 20% more than strength, high lift have, the water yield is heavy.
5. Model CT-S pump small to install convenient, can install in sand, ink and intermediate land is it up to to get on horsing, at all waterproof, does not account for the space to operate quietly, it is simple and convenient to maintain.

Use: Sea-farming, shipping

CAST IRON material
Pump up water the impeller BC material
Requirements 3" -8"

Characteristic:

1. Centrifugal pump wanton to adjust from belt pulley, lift high or low prices and size of water yield
2. General centrifugal pump majority Pu rely mainly on adding the cushion material, adding the cushion material will wear and tear the axis, can not pump water sometimes
3. Model CT-L centrifugal pump, quarry VFA material, the mechanical axis replaces and adds the cushion material, the axis does not wear and tear the axis for SUS304 material, water-tight, the bearing adopts the sealed type, needn't add the butter.

Use: Aquaculture, irrigates, farming and animal husbandry

CSUS316 material
Requirements 3" -8"

Characteristic:

Pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is SUS316 material, the mechanical axle seals FA and VTSIC material,

Use: Sea-farming, shipping